Skip to main content

Share:
Subscribe:
Subscribe

Product Overview:

High-pin count, general-purpose MCU with built-in A/D and D/A converters,serial interface, sub-clock, etc. Maximum oscillation frequency is 16.8MHz.Comes in a 64-pin package. Available in Flash memory and Mask ROM versions.This is pin-compatible and software compatible with 3803H Group Flash memoryand Mask ROM versions.

3803H Group (QzROM version) page is here.

 

Key Features:

[Mask Rom Version/ Flash Memory Version]

  • Basic machine-language instructions: 71
  • Minimum instruction execution time: 0.24 μs (at 16.8 MHz oscillationfrequency)
  • Memory size
    • ROM: 16 K to 60 K bytes
    • RAM: 640 to 2048 bytes
  • Programmable input/output ports: 56
  • Software pull-up resistors: Built-in
  • Interrupts: 21 sources, 16 vectors (external 8, internal 12, software1)
  • Timers: 16-bit × 1, 8-bit × 4 (with 8-bit prescaler)
  • Watchdog timer: 16-bit × 1
  • Serial Interface: 8-bit × 2 (UART or Clock-synchronized), 8-bit × 1(Clock-synchronized)
  • PWM: 8-bit × 1 (with 8-bit prescaler)
  • A/D converter: 10-bit × 16 channels (8-bit reading enabled)
  • D/A converter: 8-bit × 2 channels
  • LED direct drive port: 8
  • Clock generating circuit: Built-in 2 circuits (connect to external ceramicresonator or quartz-crystal oscillator)
  • Power source voltage
    • In high-speed mode
      • At 16.8 MHz oscillation frequency: 4.5 to 5.5 V
      • At 12.5 MHz oscillation frequency: 4.0 to 5.5 V
      • At 8.4 MHz oscillation frequency: 2.7 to 5.5 V
      • At 4.2 MHz oscillation frequency: 2.2 to 5.5 V (only Mask Rom Version)
      • At 2.1 MHz oscillation frequency: 2.0 to 5.5 V (only Mask Rom Version)
    • In middle-speed mode
      • At 16.8 MHz oscillation frequency: 4.5 to 5.5 V
      • At 12.5 MHz oscillation frequency: 2.7 to 5.5 V
      • At 8.4 MHz oscillation frequency: 2.2 to 5.5 V (only Mask Rom Version)
      • At 6.3 MHz oscillation frequency: 1.8 to 5.5 V (only Mask Rom Version)
    • In low-speed mode
      • At 32 kHz oscillation frequency: 1.8 to 5.5 V (for Flash Memory Version 2.7to 5.5 V)
  • Power dissipation
    • In high-speed mode
      • TBD mW (typ.) (at 16.8 MHz oscillation frequency, at 5 V power sourcevoltage) (Mask Rom Version)
      • TBD mW (typ.) (at 16.8 MHz oscillation frequency, at 5 V power sourcevoltage) (Flash Memory Version)
    • In low-speed mode
      • TBD μW (typ.) (at 32 kHz oscillation frequency, at 3 V power sourcevoltage) (Mask Rom Version)
      • TBD μW (typ.) (at 32 kHz oscillation frequency, at 3 V power sourcevoltage) (Flash Memory Version)
  • Operating temperature range: –20 to 85 degrees C
  • Packages
    • SP: PRDP0064BA-A (64P4B): 64-pin 750 mil SDIP
    • HP: PLQP0064KB-A (64P6Q-A): 64-pin 10 × 10 mm LQFP
    • KP: PLQP0064GA-A (64P6U-A): 64-pin 14 × 14 mm LQFP
    • WG: PTLG0064JA-A (64F0G): 64-pin 6 × 6 mm FLGA

Flash memory mode

  • Power source voltage: Vcc = 2.7 to 5.5 V
  • Program/Erase voltage: Vcc = 2.7 to 5.5 V
  • Programming method: Programming in unit of byte
  • Erasing method: Block erasing
  • Program/Erase control by software command
  • Number of times for programming/erasing: 100

Notes: The flash memory version cannot be used for applicationembedded in the MCU card.

Key Applications:

Camera, household appliances, consumer electronics, etc.

Product Lineup:


Loading...

End of content

Back To Top